Pylontech Pelio-L-5.12 Operation Manual page 57

damaged or not. Check the setting of inverter or charger,
check the communication between inverter and battery
system.
Try turn
connected. If the error still, switch off the module and
contact your local distributor for repair.
DMOS fail
a) The fuse blew out.
Solution:
Disconnect
disconnect
damaged or not. Check the setting of inverter or charger,
check the communication between inverter and battery
system.
Try turn
connected. If the error still, switch off the module and
contact your local distributor for repair.
Reverse connection
a) Reverse connection of cables.
Solution:
Disconnect breaker. Check the cable connection and
disconnect
damaged or not. Then try turn on the single module,
without any cable connected. If no alarm, then it is
reverse connection of cables. Switch off the module and
contact your local distributor.
Excluding the points above, if the faulty still cannot be
identified,
distributor.
Emergency Situations
on the single
Power off
breaker. Check
all power
on the single
Power off
all power
turn off battery
module,
all battery
the cable
cables. Check
module,
all battery
cables. Check
and contact
53
without any
and inverters.
connection
the power
without any
and inverters.
the power
your
cable
and
port
cable
port
local