Pylontech Pelio-L-5.12 Operation Manual page 33

new battery module and put it on the top of previous
battery module. Tighten the screws on the four feet to
connect it to the battery module below.
6) One end of the anti-tipping bracket is fixed on the
battery case and the other end is fixed on the wall.
Drill holes for screws in the wall then use expansion
screws to fasten the bracket on the wall. Finally,
install the bracket on the battery case with screws.
The bracket should be installed on the both side of the
battery module.
M6
N·m
5
M5
N·m
3
7) Maximum 3 in a stack for wall mounting.
29