1
WiFi stick
2
Manual
3
Warranty card
4.2 System Working Environments Checking
4.2.1 Cleaning
Before installation and system power on, the dust
and iron scurf must be removed to keep a clean
environment.
The system cannot be installed in desert area
without an enclosure to prevent from sand.
Danger: Battery module has active DC power at
terminal all the time, must be careful to handle
the modules.
4.2.2 Ventilation
There are no mandatory ventilation requirements for battery
module, but please avoid of installation in confined area.
The aeration shall avoid of high salinity, humidity or
temperature.
Caution: Pelio system is IP65 design. But please
avoid frost or direct sunlight. Out of the working
temperature range will cause the battery system
over / low temperature alarm or protection which
further lead to the cycle life reduction. According
to the environment, the cooling system or heating
system should be installed if it is necessary.
22
1
1
1