Yaesu FTM-500DR Operating Manual page 61

®
Bluetooth received audio output
®
When a Bluetooth
from the headset only, or from both the headset and the transceiver speaker.
1. Press and hold the FUNC knob.
2. Touch [111 Bluetooth].
Or rotate the FUNC knob to select [111 Bluetooth], then
press the FUNC knob.
3. Rotate the FUC knob to select [AUDIO], then press the
FUNC knob.
4. Rotate the FUNC knob to select "AUTO" or "FIX".
AUTO : The received audio comes from only the Blue-
tooth headset.
FIX
: The received audio comes from both the Blue-
tooth headset and the speaker of this transceiv-
er.
Factory default value: "AUTO".
5. Press the DIAL knob, SUB DIAL knob or PTT switch to
save the settings and return to normal operation.
headset is connected, the received audio can automatically be output
S-DX DISP
DIGITAL / ANALOG TRANSCEIVER FTM - 500D
OPTION
111 Bluetooth
DEVICE
STATUS STATUS Disconnected Connected
SAVE
AUDIO
OFF
AUTO
59