Display - Yaesu FTM-500DR Operating Manual

Display

Lights when GPS Log Function is enabled
Lights when GPS is acquired
Lights when AUTO DIALER function is enabled
Lights when Auto Power Off is activated
Lights when the mute function is activated
Displays mode
Displays memory name (tag)
Mode/Status indicator
S-meter/transmit power level
Mode/Status indicator
S-meter/transmit power level
z Status Bar
Appears when the lock function is enabled.
Appears when the Mute function for Sub-band is enabled.
Appears when the APO (Automatic Power-Off) function is enabled.
Appears when the DTMF Autodialer function is activated.
Appears when the GPS Satellites are acquired.
Appears when the GPS Log function is enabled.
Appears when the Voice recording function is activated. (About 3 seconds after the
squelch closes, the recording pauses and a "II" appears.)
Appears when a microSD card is inserted.
Appears when the Bluetooth function is activated.
Appears: Bluetooth device is connected.
Blinks:
Appears when the VOX function is enabled.
26
LOCK
YAESU MUSEN
Bluetooth device not connected.
Lights when Voice recording function is activated
Lights when a microSD memory card is inserted
Lights when Bluetooth function is activated
Lights when VOX function is activated
Display of settings such as DG-ID/TONE
Communication Mode
Main-band frequency
Volume/Squelch Bar Graph (Main-band)
Display of settings such as DG-ID/TONE
Displays operation mode
Sub-band frequency
Volume/Squelch Bar Graph (Sub-band)