Yaesu FTM-500DR Operating Manual page 57

7. Press the SUB DIAL knob.
The search starts, and the model name of the found
Bluetooth device is displayed in the list.
®
8. When the headset to be connected is displayed,
press the
9. Rotate the FUNC knob to select the Bluetooth
headset to be connected.
10. Press the SUB DIAL knob.
11. Rotate the SUB DIAL knob to select [CONNECT].
12. Press the SUB DIAL knob.
13. To return to the normal operation screen.
While connected to a Bluetooth
"icon lights up on the FTM-500DR/DE screen, and
the received audio and operation beep will be heard
from the Bluetooth
• When the connection is complete, the [DE-
VICE] field will display "Name of the connected
Bluetooth headset" and the [STATUS] field will
®
display "Connected".
• The LED of SSM-BT10 blinks blue. The pairing is
completed.
z Disable the Bluetooth
To cancel the Bluetooth
"OFF" in step 4 above.
z Subsequent Bluetooth
• When the power is turned OFF while the Bluetooth
next time the power is turned ON, the same Bluetooth
and automatically connected when found.
• If the Bluetooth
the power of the same Bluetooth
nect automatically. If not, turn the FTM-500DR/DE and Bluetooth
and then ON again.
• To connect to other Bluetooth
Bluetooth headset" on page 58.
®
key to stop searching.
headset.
®
function
®
operation, just repeat the above procedures, selecting
®
headset connection when the power is turned ON
®
headset cannot be found, the "
®
®
headset, the"
®
headset is turned ON in this state, it will con-
®
headsets, refer to "Connect with another
®
DEVICE LIST
SSM-BT10
yaesu-01
yaesu-02
Searching
DEVICE LIST
SSM-BT10
yaesu-01
yaesu-02
OPTION
111 Bluetooth
Bluetooth
DEVICE SSM-BT10
STATUS STATUS Connected Connected
AUDIO
headset is connected, the
®
headset is searched for
®
" icon blinks on the screen. If
headset OFF
®
ON
AUTO
55