Setting Up The Server - Digital Watchdog Blackjack CX DW-BJCX8T-LX Quick Start Manual

SETTING UP THE SERVER

STEP 1: Connect external devices, power and network.
1. Connect a monitor, USB keyboard, USB mouse and the LAN side of the network cable to one 2.5Gb Ethernet port (B11 on the
diagram). Connect the cameras to the PoE ports when the unit is fully booted to the OS.
NOTE
See page 2 for detailed back panel breakdown for each model.
2. Connect the server to an appropriate power source. It is recommended to use a 750VA or higher UPS system.
3. Power up the server if the server does not turn on automatically by pressing the power button on the back of the server. (B3 on
the diagram).
* Connecting the power cable to the live power source may turn on the server automatically.
** If the power does not turn on, verify the power supply switch is on.
STEP 2: Configure the date and time
1. Open Settings > Details.
2. Click Date &Time.
3. Turn OFF Automatic Date & Time and Automatic Time Zone.
Quick Start Guide
3