5. Restart the connection by switching OFF, then turn it ON.
6. Click Settings of the Ethernet not connected.
7. Change to Manual, then enter Address, Netmask, Gateway and DNS.
8. Click Apply to save.
9. Connect the network cable and verify the connection.
NOTE
If you are not connecting to the Blackjack
port forwarding on your router to access the server. Contact your Network Administrator or Installer for
additional information
SETTING UP THE DW SPECTRUM® MEDIA SERVER
STEP 1:
Initial run from the Blackjack server
1.
Open the DW Spectrum client by double click on the DW Spectrum icon.
2. Click on the pre-configured server.
3. If the pre-configured server does not automatically log in, enter the password and click Connect.
*Default password: admin12345 (case sensitive).
STEP 2:
To rename the server
1.
Right-click on the server name listed on the resources, then click server settings.
2. Go to the general tab and enter the new server name in the name field. Click OK.
from the same network, you may be required to perform
®
Login: admin
Password: admin12345
Quick Start Guide
5