8.3 Machine Lowered Example
An optional Machine Lowered input is available on the Power and Control Wiring terminal block. The
Machine Lowered input will allow the crane operator to fly over the top of a No-Fly Zone. This is available
on the single fixed location No-Fly Zone or on Zone 1 only of the configurable No-Fly Zones.
Figure 8-3: Machine-Lowered Input
Wire the Machine Down contact to the Machine-Lowered input on (MACH) terminal located on the Power
and Control Wiring terminal block if used.
Intelli-Protect User Manual
April 2023
Page 58 of 65