Reflector Installation - Magnetek Intelli-Protect NFZ-CONFIG-5050 User Manual

2.3 Reflector Installation

For best reflectivity/laser signal, mount the reflector in the same orientation as the laser so the laser beam
is perpendicular to the reflector. The arrow on the back of the reflector should be the same direction as the
laser. See Figure 2-2 below.
Reflector
Trolley Reflector
Bridge Reflector
Trolley Reflector
Bridge Reflector
Trolley Reflector
Bridge Reflector
Figure 2-2: Mounting the Laser
Mounting Guide Reflector Layout
NFZ-CONFIG-5050
1 wide x 1 high
1 wide x 1 high
NFZ-CONFIG-50300
1 wide x 1 high
3 wide x 2 high
NFZ-CONFIG-150300
2 wide x 1 high
3 wide x 2 high
Qty
1
1
1
6
2
6
Intelli-Protect User Manual
April 2023
Page 15 of 65