Grease Points - Wallenstein WX540 Operator's Manual

WX540, WX540L
Log Splitter

9.4 Grease Points

Use a hand-held grease gun for all greasing. Pump one shot
of grease per fitting.
Look for this decal on your machine. It
indicates a grease point and the interval in
hours.
• Wipe grease fitting with a clean cloth before greasing to
avoid injecting dirt and grit.
• If fittings do not take grease, remove and clean them
thoroughly. Replace grease fittings as necessary.
Location
1
Location
2
2
Figure 22 – Grease points
33
Service and Maintenance
Every 40 hours of operation
or as required
Frame slide (apply a small amount of grease to the
slide).
Every 100 hours of operation
or annually
Axle bearings
1
2