Imagepress Firmware Upgrades Using The Service Support Tool - Canon imagePRESS C7011VPS Service Manual

Canon
3.

imagePRESS Firmware Upgrades Using the Service Support Tool

The SST
Canon USA's
system components:
a) Upgrade Functions:
•
•
•
•
•
•
•
•
The imagePRESS C7011VP Series devices support firmware
downloads from the SST and a USB memory stick. When the hard
disk drive is replaced, the SST is used to format the new HDD and
load software.
The SST Download Progress Monitor
USA's
an imagePRESS firmware update is performed, as it will enable the
service technician to monitor the download progress of firmware to
the imagePRESS C7011VPS Series. Refer to the Service Manual for
complete upgrading procedures.
b) Backup / Restore RAM Data
If replacing and PCBs with FDIMMs attached or initializing RAM, the
Service Support Tool can be used to create a backup file of the RAM
data on the FDIMMs and saved to a PC. Once the PCB has been
replaced, the RAM backup file can be restored to the imagePRESS
device and factory settings restored.
41 Check the e-Support Center Web Site
42 Check e-Support Center Web Site
imagePRESS C7011VPS/C6011VPS/C6011S Service Guide
Revision 3
imagePRESS C7011VPS/C6011VPS/C6011S Service Guide
41
(Service Support Tool) (version 4.72 or later) is available via
e-Support Center Web Site
System Software stored on the HDD
Main engine firmware
Accessory firmware (Refer to the SST User Manual for a list of
supported devices and accessories.)
MEAP Contents
Language
HDD Format
RUI (Remote User Interface) stored on the HDD
BootROM stored on a FDIMM (Flash Double Inline Memory
Module) on the Main Controller PCB (Printed Circuit Board)
e-Support Center Web
Download Center for the most current version of the Service Support Tool
Download Center for the most current version of the SST Download Progress Monitor.
for upgrading the following
42
is available via the Canon
Site. The tool must be used whenever
January 2015
Page 45