Iv. Third Party Finishers And Accessories; Square Fold Booklet Maker; Square Fold Booklet-Maker With Two-Knife Trimmer; Blm300C Professional Booklet Maker - Canon imagePRESS C7011VPS Service Manual

Canon

IV. Third Party Finishers and Accessories

A.

Square Fold Booklet Maker

•
An in-line finishing solution attached to the Booklet Trimmer-D1.
•
Provides a professional square back finishing look to the saddle stitch
booklets; similar to a bound book for a wide range of on-demand
applications.
•
Refer to the Square Fold Booklet-Maker with Two-Knife Trimmer Service
Support Guide for more details.
B.

Square Fold Booklet-Maker with Two-Knife Trimmer

•
An in-line finishing solution attached to the Booklet Trimmer-D1
•
Provides a professional square back finishing look to the saddle stitch
booklets; similar to a bound book for a wide range of on-demand
applications.
•
The Two-Knife Trimmer is capable of trimming booklets to a width of
approximately 7.87" (200 mm) up to 12.6" (320 mm).
•
Refer to the Square Fold Booklet-Maker with Two-Knife Trimmer Service
Support Guide for more details.
C.

BLM300C Professional Booklet Maker

•
An in-line finishing solution attached to the High Capacity Stacker-G1.
•
Creates a full bleed printing and booklet making solution for a wide
range of on-demand applications.
•
Supports sheet sizes ranging from 5.5" x 9.76" (140 mm x 248 mm) to
12.6" x 18.5" (320 mm x 470 mm)
•
Includes a two position stapler that can staple up to 30 sheets (80 g/m
120 pages booklet) (or 6 mm thickness whichever is less).
•
The BLM300C Professional Booklet Maker is the core device of a
modular online finishing system. Optional modules include:
•
•
•
•
•
•
•
•
Refer to the BLM300C Professional Booklet Maker Service Support
Guide for more details.
imagePRESS C7011VPS/C6011VPS/C6011S Service Guide
Revision 3
imagePRESS C7011VPS/C6011VPS/C6011S Service Guide
Front Trimmer
2-Knife Trimmer
Square Fold
Rotator
Long Belt Stacker
SDD Short Belt Stacker BST6900
SDD Front Trimmer BLT6989
2
,
January 2015
Page 16