Tuuci OCEAN MASTER MEGA MAX CENTER POST Installation Instructions Manual page 9

I N S T A L L A T I O N I N S T R U C T I O N S
OCEAN MASTER MEGA MAX CENTER POST
IF APPLICABLE: AMBIA LED LIGHT INSTALLATION
countersunk
hole
light
light
connectors
screws
& wires
Step 1 Step 2
Connect the wires from the light to Ensure both light halves are mounted, and the
wires are inside the pole.
the wires emerging from the mast,
as illustrated below.
Insert screws going through the countersunk
hole on the right and then through the
Note:
mating hole on the left half.
Use electrical tape to secure the connectors
to prevent the wires from disconnecting
inside the pole.
Step 3
Cut zip tie holding power supply cable on the parasol mast and plug it into an electrical outlet.
TUUCI.COM
1009234
9