Installing And Getting Ready; Assembling The Product - LG AeroFurniture Owner's Manual

16 OVERVIEW

Installing and Getting Ready

Assembling the Product

Remove the packaging vinyl and the filter vinyl
from the product before using the product.
Remove the main body and the table from
1
the box and remove the protective vinyl.
2 Prepare the main body and the table as
shown in the figure below.
• The side with the LG logo is the front of
the product.
• Based on the top side of the table, on the
left side from the LG logo is the status
panel and on the right side from the LG
logo is the wireless charging unit.
Status
Panel
Direction of the LG logo
<Front> <Top side of the table>
Assemble the table to the main body
3
according to the direction.
Status
Panel
CAUTION
• Assemble the table to the main body until a
clicking sound is heard.
– If it is not assembled properly, the product
won't operate.
• Pay attention to the assembly directions when
assembling the table to the main body.
– Failure to do so may cause malfunction or
product failure.
• If power is connected to the main body
without assembling the table, the product
won't operate.
NOTE
• Assemble the track type in the same way as
Wireless
charging unit the circle type.
Wireless
charging unit
EN