Installing The Safe Plate; Getting Started - LG U9CV2B.AWHEUS Owner's Manual

Installing the Safe Plate

1
Assemble the safe plate.
2
Place the product so that the center
line of the product aligns with the
center line of the plate.
3
Assemble the product completely by
pushing it down until a click is heard.
• If the product is tilted, reassemble it.
• After fixing the safe plate, tilt the
product backward to separate it.
CAUTION
• Be sure to install the safe guide in order to
use the product safely.
• Do not use the product on uneven or
inclined floors.
• When assembling the safe plate, be
careful to prevent your hand from being
jammed.
• Do not use the safe plate for purposes
other than that for which it is designed.

Getting Started

Press the Standby On/Off button to start
operation.
NOTE
• When starting operation for the first
time after installing the product, it will
operate in Wide mode and with step 5
of fan speed.
• If you stop operation and resume it, it
will start cleaning with the mode you
last selected.
• Even if power is lost due to a
blackout, the product will remember
the mode(Fan speed, Mode, Display
brightness) you used last.
• When you start driving, the dust
concentration is displayed after sensor
stabilization (about 15 seconds). While
sensor stabilization is in progress, the
clean stabilization screen (
on the status display.
EN
) appears
21