Table of Contents
Advertisement
08
SAFETY INSTRUCTION
When using the UVnano function
This is only for models with the UVnano function. Models with the UVnano function are equipped with
a UV-C lamp (UV LED) inside the product.
PROHIBITIONS
• Be careful as UV-C may be released to the outside due to unintended use of the product or
damage to the product. UV-C can harm the eyes and skin even with minimal exposure.
• Do not operate the UV LED outside the product.
• Do not touch or clean the product while the UVnano function is operating.
• Do not remove the UV hazard label from the inside of the product. UV-C may be emitted from the UV LED.
• The UV LED is not a part that needs cleaning, so do not clean the UV LED or parts displaying the
UV hazard label separately.
• The UV LED is a non-user-replaceable part. Do not replace it yourself.
• If the UV LED is damaged, do not operate it.
COMPLIANCE
• The product must be turned off at the main power switch and unplugged before the installation,
inspection, repair, or replacement of the UV LED.
• Installation, inspection, repair, or replacement procedures related to UV LEDs, must use the UVnano module
provided by LG Electronics and contact an LG Electronics Customer Information Center.
• If the UV LED is damaged or it needs to be replaced, stop using it and contact an LG Electronics
Customer Information Center.
CAUTION
CAUTION
To reduce the risk of minor injury to persons, malfunction, or damage to the product or property when
using this product, follow basic precautions, including the following:
When installing the product
PROHIBITIONS
• Do not install the product in an unstable place or in a place with severe vibration.
• Do not install the product above the user's eye level.
• Do not install the product inside a vehicle (camping vehicle), a ship, or an airplane.
• When moving the product, do not push or drag it by tilting.
• Do not place the product near a TV or audio system.
• Do not install or use the product in a location where there is a risk of explosion.
COMPLIANCE
• Install the product in a location with a firm and level floor.
• Install the product in a space with no threshold.
• When assembling the table or the table top, do not let other objects come between them.
EN
Advertisement
Table of Contents
