Assembly; Installing The Puricare Filters - LG AP300AWFA Owner's Manual

ASSEMBLY

Installing the PuriCare Filters

1
Filter case
1
Separate the filter cases from the product.
• Pull the filter cases at the spots marked in Figure 1 above to separate the
cases from the product.
2
Insert the PuriCare Filters into the filter cases with the arrow on the Puri-
Care Filters facing up.
3
Align the filter cases with the grooves at the front of the product and press
the cases in until they click into place.
• Make sure to align the filter cases correctly before reassembling. The LG
PuriCare logo is on the right filter case.
NOTE
• Do not press the center of the PuriCare Filter too hard when installing the filter.
Doing so may lead to the filter blocking the air inlet.
• Pay attention to the direction indicated by the arrow on the filter when installing
the PuriCare Filter. Otherwise, product performance may be degraded.
– The horizontal or vertical direction of the PuriCare Filter does not affect
product performance.
• Ensure the product is turned off before replacing the filter.
• Make sure that the PuriCare Filters are installed before using the product. Do
not use the product without the filters in place.
8
2 3
Left filter case Right filter case