Installing And Getting Ready; Removing The Protective Vinyl From The Filter - LG AS60GHWG0 Owner's Manual

14 OVERVIEW

Installing and Getting Ready

Removing the Protective Vinyl
from the Filter
Unpack the appliance and remove all
1
packing tape and filter vinyl before using the
appliance.
Hold the top end of the front cover of the
2
product with the LG logo and pull it slightly to
achieve separation.
Disassemble the filter and remove the vinyl.
3
Install the filter in the appliance with the side
4
where the filter handle is attached facing up.
Filter
handle
Insert the fixing part at the bottom of the cover
5
into the fixing grooves at the bottom of the
product and close the cover.
Fixing part
b
CAUTION
• Be sure to remove the vinyl before using the
product.
• Pay attention to filter direction when installing it.
EN
a
Fixing groove