Panasonic AQUAREA WH-ADC0912K6E5AN Service Manual page 50

Menu
7 Installer setup Service setup
7.1 Pump maximum speed
To set the maximum speed of
the pump.
7.2 Pump down
To set the pump down
operation.
7.3 Dry concrete
To dry the concrete (fl oor, walls,
etc.) during construction.
Do not use this menu for any
other purposes and in period
other than during construction
Default Setting Setting Options / Display
Sterilization: Boiling temp.
Set boiling
65 °C temperatures for
sterilize the tank.
Sterilization: Ope. time (max)
Set sterilizing time
0:10
(in hours and minutes)
Setting the fl ow rate, max. duty and operation
ON/OFF of the pump.
Flow rate: XX:X L/min
Max. Duty: 0x40 ~ 0xFE,
Pump: ON/OFF/Air Purge
Pump down operation
ON
Edit to set the temperature of dry concrete.
ON / Edit
Edit
Heating temperature
for drying the
Stages: 1 concrete.
Temperature: 25 °C Select the desired
stages: 1 ~ 10,
range: 1 ~ 99
ON
Confi rm the setting temperatures of dry
concrete for each stage.
50