19.2 To Remove Remote Control
Bottom
case
Insert the
driver and
slightly turn.
1. Remove the top case from the bottom case.
19.3 To Remove RCCB
2. Disconnect lead wires
(Brown and Blue)
from RCCB.
3. Remove screws and
Top case
Flat-blade
screwdriver
bracket to remove
the RCCB.
3. Remove 2 screws then take out the bottom case.
Claw
(3 places)
Disconnect the
Remote controller
wiring
2. Disconnect the Remote Controller wiring.
1. Remove 2 screws to swing
the Control Board Cover.
239
Slide it
downwards
to unhook