Advertisement
PLaTfoRm moDe
1
To change to platform mode:
1.
Hang the platform to the machine coupler;
insert the locking bolt into the coupler
2.
Stabilise the machine and do not switch the ignition
off
3.
Connect the platform's electrical lead to the boom
head (
1
2
4.
Connect the hydraulic hoses (if applicable)
5.
Place the control box in its location in the platform.
Secure with the locking system provided (
6.
Connect the platform's electrical lead to the right
side of the control box (
7.
Switch the control box on
8.
Press the "start" green button. The horn indicates
that the machine radio-control communication is
established
3
9.
Start the engine using the radio-control button
4
1 5
). The machine engine stops
)
4
)
3
Advertisement
