Playback; Basic Playback - JVC HR-S9400EE Instructions Manual

14
EN
Ba sic
Pla yba ck
● Turn on the TV and select the VIDEO channel (or AV mode).
● Set the O U TPU T SYSTEM CO N VERTER switch to the
appropriate position.
• •
• • • •
• • • •
• • • •
• • • •
• • • •
REW
Downloaded from: https://www.usersmanualguide.com/
(
pg. 26)
2
1 2 3
6
4 5
7 8 9
0
4
FF
The easiest, most basic operation possible with your video
recorder is tape playback. Already-recorded signals on a video
tape are read by your video recorder and displayed on your TV
just like a TV programme.
LO AD A CASSETTE
1
Make sure the window side is up, the rear label side is
facing you and the arrow on the front of the cassette is
point toward the recorder. Don't apply too much
pressure when inserting.
● The recorder power comes on automatically and the
counter is reset to 0:00:00.
● If the record safety tab has been removed, playback
begins automatically.
FIN D PRO GRAMME ST ART
PO IN T
2
If the tape is advanced past the start point, press REW
or turn the TIM E SCAN SH U TTLE ring to the left.
To go forward, press FF or turn the TIM E SCAN
8
SH U TTLE ring to the right.
ST ART PLAYBACK
3
Press PLAY .
STO P PLAYBACK
4 Press STO P on the remote or STO P/ EJECT on the
recorder's front panel. Then press STO P/ EJECT to
remove the cassette.
U sable cassettes
● Compact VHS camcorder recordings can be played on
this video recorder. Simply place the recorded cassette
into a VHS Cassette Adapter and it can be used just like
any full-sized VHS cassette.
● This video recorder can record on regular VHS and
Super VHS cassettes. While only VHS signals can be
recorded on regular VHS cassettes, both VHS and Super
VHS signals can be recorded and played back using
Super VHS cassettes.

PLAYBACK