JVC HR-S9400EE Instructions Manual page 18

18
EN
• •
• • • •
• • • •
• • • •
• • • •
• • • •
A/ B CO D E
C.RESET
AU D IO M O N ITO R
REW
SCEN E FIN D ER
Soundtra ck Selection
Y our video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.
D uring Playback
Pressing AU D IO M O N ITO R (
Recorder's Front Panel
L + R
L
R
NORM
L + R + NORM
Downloaded from: https://www.usersmanualguide.com/
2
1 2 3
4 5 6
7 8 9
0
4
FF
) changes the soundtrack being played back as follows:
TRACK
On-Screen Display
HI FI
L R
HI FI
L
HI FI
R
NORM
HI FI
NORM
Spa tia lizer
This feature expands sound field when you play back any stereo
source or view a stereo programme while recording it.
*Spatializer has no effect on recording quality.
8 ACTIVATE SP ATIALIZER
1
Press SPATIALIZER ; the current setting will be displayed
on the screen for about 5 seconds. Pressing
SPATIALIZER while the screen shows the display
changes the setting.
● To view a stereo programme such as movies or
music, select "SPATIALIZER
spacious sound.
● To view a monaural programme, select
"SPATIALIZER [ ST" which simulates a stereo effect.
● Select "SPATIALIZER OFF" to turn off Spatializer if
the sound becomes unnatural with either
"SPATIALIZER
● If your TV is equipped with 3D-PHONIC and if you
use both Spatializer and 3D-PHONIC at the same
time, the sound may become unnatural; set either
function to "OFF".
● The setting will remain effective even though you
turn on/off the recorder.
N O TES:
● Spatializer is effective only with a stereo TV.
● You can change the Spatializer setting even though "O.S.D."
is set to "OFF".
● The setting cannot be changed during search, still, frame-by-
frame playback or slow motion mode.
● When this recorder is used as the player for editing, the
recorded audio will correspond to the Spatializer setting.
U SE
For Hi-Fi stereo tapes
For main audio of Bilingual tapes
For sub audio of Bilingual tapes
For audio-dubbed tapes
For audio-dubbed tapes
PLAYBACK (cont.)
" to create more
" or "SPATIALIZER [ ST" selected.
N O TES:
● "L + R" should normally be selected. In
this mode, Hi-Fi stereo tapes are played
back in stereo, and the NORM track is
played back automatically for tapes
with only normal audio.
● "O.S.D." must be set to "ON" or the
on-screen displays will not appear
( pg. 13).