Table of Contents
Advertisement
PLAYBACK
Ba sic
Pla yba ck
Turn on the TV and select the VIDEO channel (or AV mode).
REW
Downloaded from:
https://www.usersmanualguide.com/
1
2
3
2
4
5
6
7
8
9
0
4
1
FF
The easiest, most basic operation possible with your video
recorder is tape playback. Already-recorded signals on a video
tape are read by your video recorder and displayed on your TV
just like a TV programme.
LO AD A CASSETTE
1
Make sure the window side is up, the rear label side is
facing you and the arrow on the front of the cassette is
point toward the recorder. Don't apply too much
pressure when inserting.
● The recorder power comes on automatically and the
counter is reset to 0:00:00.
● Select the appropriate colour system by pressing the
CO LO U R SYSTEM button. (
● If the record safety tab has been removed, playback
begins automatically. (
FIN D PRO GRAMME ST ART
PO IN T
2
If the tape is advanced past the start point, press REW .
To go forward, press FF .
ST ART PLAYBACK
3
Press PLAY . "BEST" appears blinking in the recorder's
display panel during automatic tracking. (
STO P PLAYBACK
4
Press STO P on the remote or STO P/ EJECT on the
recorder's front panel. Then press STO P/ EJECT to
remove the cassette.
U sable cassettes
● Compact VHS camcorder recordings can be played on
this video recorder. Simply place the recorded cassette
into a VHS Cassette Adapter and it can be used just like
any full-sized VHS cassette.
● This video recorder can record on regular VHS and
Super VHS cassettes. However, it will record and play
back regular VHS signals only. It is not possible to play
back a recorded Super VHS tape.
11
EN
pg. 28)
pg. 16)
pg. 18)
Advertisement
Table of Contents
