Table of Contents
Advertisement
PLAYBACK
Ba sic
Pla yba ck
3
2
REW
4
Downloaded from:
https://www.usersmanualguide.com/
1
6
q
4
2
1
2
3
4
5
6
7
8
9
0
FF
The easiest, most basic operation possible with your video
recorder is tape playback. Already-recorded signals on a video
tape are read by your video recorder and displayed on your TV
just like a TV programme.
LO AD A CASSETTE
1
Make sure the window side is up, the rear label side is
facing you and the arrow on the front of the cassette is
point toward the recorder. Don't apply too much
2
pressure when inserting.
● The recorder power comes on automatically and the
counter is reset to 0:00:00.
● If the record safety tab has been removed, playback
begins automatically.
FIN D PRO GRAMME START
PO IN T
2
If the tape is advanced past the start point, press REW
or turn the SH U TTLE ring to the left and release it.
To go forward, press FF or turn the SH U TTLE ring to the
right and release it.
3
ST ART PLAYBACK
3
Press PLAY . " BEST" appears blinking in the recorder's
display panel for 5 seconds (
● Playback picture quality of LP recordings will not be
as high as SP recordings.
STO P PLAYBACK
4
Press STO P on the remote or STO P/ EJECT on the
recorder's front panel. Then press STO P/ EJECT to
remove the cassette.
2
U sable cassettes
● Compact VHS camcorder recordings can be played on
this video recorder. Simply place the recorded cassette
into a VHS Cassette Adapter and it can be used just like
any full-sized VHS cassette.
● This video recorder can record on regular VHS and
Super VHS cassettes. However, it will record and play
back regular VHS signals only. It is not possible to play
back a recorded Super VHS tape.
11
pg. 22).
Advertisement
Table of Contents
