Playback
NTSC, PAL and MESECAM video tapes can be played back on
this video cassette player. Refer to the "Colour system output
mode selection" section for details.
Before proceeding:
• Turn on the power of the TV and video cassette player.
• Make sure that the TV is set to the video channel or that the
TV's TV/VIDEO switch is set to VIDEO (refer to the "Setting
the video channel" section for details).
1
MIC
DIGITAL ECHO
SP/LP/EP
B.E.S.T POWER-ON
LP / EP
STANDBY / REC
MIN
MAX
0
10
Load a pre-recorded cassette.
1
If the safety tab on the cassette is removed, playback will
start automatically.
Press the Play - button to start playback.
2
7 Press the Stop/Eject § button or the remote control's
Stop 7 button to stop playback.
To fast forward or rewind the tape:
7 From the stop mode, press the Fast forward ¡ or
Rewind 1 button.
Note:
All five indicators excluding the STANDBY/REC indicator blink
one by one in a clockwise sequence during playback or fast
forward mode and in a counterclockwise sequence during
rewind mode. They do not blink one by one during rewinding
in the repeat playback mode.
Downloaded from:
https://www.usersmanualguide.com/
REMOTE CONTROL UNIT
TV/VCR
2
AUTO
- TV CH +
- VOLUME +
NTSC
PLAYBACK
ON PAL TV
NTSC
4.43
B.E.S.T.
NTSC 3.58
PAL NTSC
NTSC Playback on PAL TV
• The vertical size of the playback picture will shrink and some
picture "noise" may appear on the screen.
• The playback picture may roll. In this case adjust the picture
with the TV's vertical hold knob (with some TV's this adjust-
ment may not be possible).
• The colour of the playback picture may differ from the
original.
• In the forward/reverse shuttle search or still modes there
may be no colour depending on the TV and video cassette
player combination.
Colour system output mode selec-
VIDEO
tion
- TRACKING +
2
To watch an NTSC tape, it will be necessary to select one of the
following output modes.
Selecting the NTSC PLAYBACK ON PAL TV mode
TV/VCR
Select this mode to watch NTSC tapes on a PAL system TV.
TV
Selecting the NTSC 4.43 mode
Select this mode to watch NTSC tapes on a multi-system TV
(that has an NTSC 4.43 setting).
Select NTSC 4.43 to record NTSC 4.43 signal.
Selecting the NTSC 3.58 mode
Select this mode to watch NTSC tapes on a NTSC system TV.
NTSC
PLAYBACK
ON PAL TV
NTSC
4.43
NTSC3.58
NTSC
PLAYBACK
ON PAL TV
NTSC
4.43
NTSC3.58
NTSC
PLAYBACK
ON PAL TV
NTSC
4.43
NTSC3.58
7