JVC HR-S9400EE Instructions Manual page 21

TimeScan
N ames of
special-effects
playback
Speed SP
Speed LP
Audio output
● The VCR's TimeScan indicator lights during TimeScan.
● The speed is shown during TimeScan in the upper right corner of the TV screen for approx. 5 seconds. (The display may be
distorted.)
● To resume normal playback, press
● When using the recorder's
● Picture and audio may become distorted when the recording speed changes. When this happens, resume normal playback
once, and then try using TimeScan again.
● The picture may be noisy or there may be a loss of colour when you change the playback speed. (More noise will appear with
LP recordings.)
● Noise may appear or the upper part of the picture may be distorted during still, frame-by-frame playback, 2x search of LP
recordings, or depending on the tape being used.
● Depending on the type of TV being used, the upper part of the picture may be distorted or there may be a loss of colour
during still, frame-by-frame playback, 2x search of LP recordings, or depending on the tape being used.
● Picture may appear distorted in comparison to normal playback.
● In TimeScan mode there will be a time lag between the video and the audio and noise may appear in the audio signal.
● TimeScan sound quality will differ in comparison to normal playback.
● When the playback direction is reversed, it takes approximately 6 seconds until sound is heard.
● Picture will be monochrome with an LP-recorded MESECAM tape during TimeScan.
If you don't want to hear TimeScan audio, set "TIM E SCAN AU D IO " to "O FF" (See below).
TimeScan Audio
The audio output can be set ON/OFF during TimeScan. Select ON/OFF as required.
The default setting is "ON".
1 Press M EN U twice to access the Main Menu screen.
2 Move the highlight bar (pointer) to "MODE SET" by pressing PU SH JO G % fi , then press O K .
3 Move the highlight bar (pointer) to "TIME SCAN AUDIO" by pressing PU SH JO G % fi , then
press PU SH JO G
4 Press M EN U to return to the normal screen.
Downloaded from: https://www.usersmanualguide.com/
Reverse
Search Play
-9x -7x -5x -3x -1x
-7x -3x
Audio is output.
* Still mode cannot be engaged using the remote control's PU SH JO G button. When the still mode is
engaged by pressing PAU SE , the TIME SCAN indicator does not light even though you can hear TimeScan
audio ( pg. 15) .
PLAY .
TIM E SCAN SH U TTLE ring, the playback speed may not change depending on how far it is turned.
to select "ON" or "OFF".
Slow-Motion *Still Slow-Motion
-1/6x -1/18x 0 1/18x
-1/6x -1/18x 0 1/18x
Audio is not Audio is Audio is not
output. output.
Forward
Play
1/6x 1x 2x 3x 5x 7x 9x
1/6x 1x 2x
Audio is output.
output.
MODE SET
AUTO TIMER : OFF
O. S. D.
S-VHS
EDIT
TIME SCAN
AUDIO
[5 ∞ ] = [ ] : ON/OFF
[MENU] : EXIT
21
EN
Search
5x 9x
: ON
: AUTO
: OFF
: ON