Recording Features - JVC HR-S9400EE Instructions Manual

Recording
Fea tures
• •
• • • •
• • • •
• • • •
• • • •
• • • •
C.RESET
Ta pe Rem a ining Tim e
DISPLAY REMAIN IN G TIME
1
Press D ISPLAY until the time remaining on the tape
appears.
N O TE:
Depending on the type of tape used, there may be times when
the tape remaining time reading may not appear right away, or
is not correct. "- - : - -" may sometimes appear, or the display
may blink on occasion.
Downloaded from: https://www.usersmanualguide.com/
RECO RD
D ISPLAY
2
1 2 3
4 5 6
7 8 9
0
4
TV PRO G
Record O ne Progra mme
W hile W a tching Another
SELECT CHAN N EL TO
WATCH
1
Once recording is in progress, all you need to do is to
set the channel controls on the TV for the station you
wish to view.
● The programme selected with the TV's channel
8
controls appears on the TV screen while the one
selected with the recorder's TV PRO G buttons is
recorded on the tape.
Ela psed Recording Time
Indica tion
You can check the exact time of a recording.
SET CO UN TER DISPLAY
1
Press D ISPLAY until a counter reading appears on the
dispay panel.
● By pressing the
display to show the counter reading, channel
position*, clock time or tape remaining time.
* channel position is not displayed during playback.
RESET CO UN TER
2
Press C. RESET before starting recording or playback.
● The counter is reset to " 0:00:00" and shows the exact
elapsed time as the tape runs.
Insta nt Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.
ST ART RECO RDIN G
1
Press RECO RD on the recorder.
EN GAGE ITR MO DE
2
Press RECO RD again. " " blinks and 0:30 appears on
the front display panel.
SET RECORDIN G DURATION
3
If you want to record for more than 30 minutes, press
RECO RD to extend the time. Each press extends
recording time by 30 minutes.
N O TE:
You can only perform ITR using the RECO RD button on the
recorder's front panel.
EN
D ISPLAY button, you can change the
23