Mounting Positions - Unigas E115X Installation Manual

Gas Filter (if provided)
The gas filters remove the dust particles that are present in the gas, and prevent the elements at risk (e.g.: burner valves, counters and
regulators) from becoming rapidly blocked. The filter is normally installed upstream from all the control and on-off devices.
ATTENTION: it is reccomended to install the filter with gas flow parallel to the floor in order to prevent dust fall on
the safety valve during maintenance operation.
Once the train is installed, connect the gas valves group and pressure switches plugs.
MultiBloc MB-DLE - Assembling the gas train
Mounting
1 Mount flange onto tube lines: use appropriate sealing agent
2 Insert MB-DLE: note position of O rings
3 Remove MultiBloc between the threaded flanges
4 After installation, perform leakage and functional test
5 Disassembly in reverse order
(O-Ring)
(A)
PART III: INSTALLATION
MB-DLE 405.. 412
A B
(B)
MB-DLE 415.. 420
C A
D B
(C)
18

MOUNTING POSITIONS

(D)