Controlling The Maximum Speed; Emergency Stop - Invacare LiNX DLX-REM110 User Manual

The speed of the wheelchair is proportional to the joystick
deflections, so that the further the joystick is moved from the neutral
position, the faster the wheelchair travels.
If the user moves the joystick back to the neutral position, the
wheelchair slows down and stops.
If the user releases the joystick from any position other than the
neutral position, the joystick returns to the neutral position and the
wheelchair slows down and stops.
1602969-B
The joystick can also be used to wake up the system when in sleep
mode, if this parameter has been enabled by the provider. Refer
to 3.5 The sleep mode, page 17.

3.1.2 Controlling the maximum speed

The speed dial allows you to limit the maximum speed of the mobility
device (that is the speed when the joystick is fully deflected) to suit
your preferences and environment.
The speed dial A offers ten discrete steps between the lowest speed
B and the highest speed C.

3.2 Emergency stop

If you press the ON/OFF key while driving, an emergency stop is
carried out. The remote only switches off after this.
Usage
15