Latched Driving Mode - Invacare LiNX DLX-REM500 User Manual

Invacare® LiNX
As soon as you start driving, speed slider and navigation
button disappear from the display. The current speed is
displayed by the speedometer, if it is enabled.
48
Fig. 5-66
The speedometer/odometer display is a new
feature, introduced for LiNX MR6.0, and replaces the
sweeping speed gauge that used to wrap around the
speed dial.
• If both the firmware and the configuration
file is greater than version 5.1.10, the new
speedometer/odometer is displayed when
enabled.
• If both the firmware and the configuration file
is less than or equal to version 5.1.10, the
previous speed indicator is displayed.
• If the firmware is greater than version 5.1.10
and the configuration file is less than or equal to
version 5.1.10, no speed indicator is displayed.

5.8 Latched driving mode

Latched driving modes allow you to latch (or maintain) a
forward or reverse speed so that you can drive without
continuously providing a drive demand.
Fig. 5-67
1637425-I