Controls On Menu Screen - Invacare LiNX DLX-REM500 User Manual

Invacare® LiNX
Entry Function
A Clock View and configure time, see 5.2.2
Configuring Time, page 25.
B Screen Lock Activate screen lock, see 5.2.3
Locking Screen to Avoid Unintentional
Response, page 26.
C Glove Mode Activate Glove Mode. Touch screen
becomes more sensitive, allowing to
interact with screen while wearing
gloves.
D Settings Open settings menu. For configuring
settings, see 5.2.4 Configuring
Settings, page 27.
E Odometer View total travel, reset odometer,
select units, see 5.2.5 Configuring
Odometer, page 29.

5.2.1 Controls on Menu Screen

Buttons
Buttons are used to perform an action, such as
the screen.
Currently we use the following buttons on our remotes:
24
Symbol
,
1. Tap on button A to perform the action.
Switches
Switches are used to change between two different states,
such as ON and OFF. The current state is visible on screen.
to close
1. Tap on switch A to change the state.
Sliders
Sliders are used to change value of a setting continuously.
Action
Close screen
Go back to previous screen
Open next screen/level. It appears only if
a menu entry permit further settings.
Increase or decrease the value of hour or
minute on clock
Fig. 5-8 Example of a button
Fig. 5-9 Example of a switch
1637425-I