5.
Check details on following screen and tap Forget this
Device button.
6.
Tap on Forget this Device button again or Cancel button,
to cancel removing.
1637425-I
Fig. 5-115
Fig. 5-116
Selecting Connectivity Card
For more information about selecting user function cards,
see 5.4 Using Direct Navigation, page 30 or 5.5 Using
Indirect Navigation, page 33.
If a connectivity card in the profile has not been configured
fully or is subject to an error, it will be classed as inoperable,
see image above.
There is a number of reasons why a connectivity card is
inoperable. These are:
•
the function's primary input is missing,
•
there are hardware errors from the Bluetooth module,
•
there is no device linked or
•
Bluetooth has not been enabled.
For the latter two reasons, the card can be selected as
these are rectified later.
Fig. 5-117
Usage
81