Selecting The Signal Of Et-Md95Vm2(Sold Separately) - Panasonic PT-D9610U Operating Instructions Manual

Selecting the signal of ET-MD95VM2(sold separately)

When using the projector with the optional ET-MD95VM2 Video Input Module, select the appropriate video signal
format that matches the video equipment you are using.
Setting procedure
MENU
AUTO SETUP
LENS
PICTURE
POSITION
OPTION
SIGNAL LIST
TEST PATTERN
MENU :
SUB MENU : ENTER
EXIT : MENU
OPTION
SET RUNTIME : nnnnnh
LAMP POWER : ＊ ＊ ＊ ＊ ＊ ＊
CONTRAST MODE : ＊ ＊
RS-232C SETTING
SYSTEM INFORMATION
VIDEO MODULE SETTING
NETWORK MODULE SETTING
PASSWORD
MENU :
SUB MENU : ENTER
EXIT : MENU
VIDEO MODULE
RGB INPUT1 INPUT2 INPUT3
LINE or Y/C
AUTO1
NTSC
PAL
SECAM
NTSC4.43
PAL60
MENU :
SELECT :
EXIT : MENU
Press the MENU button. ... The MENU screen will be displayed.
Press the UP (
Press the ENTER button. ... The OPTION screen will be displayed.
Press the UP (
MODULE SETTING.
SETTING
Press the ENTER button. ... The VIDEO MODULE SETTING screen will
be displayed.
Press the UP (
INPUT MODULE.
Press the UP (
signal system and press the UP (
select input signal format "LINE or Y/C" or "YC
•The selected signal format will be displayed.
(The picture may be distorted while the signal format is being switched.)
"If chose "LINE or Y/C" in step
( ) arrow buttons to select the video system and press the LEFT (
and LIGHT（ ) arrow buttons to select the "AUTO1" or "AUTO2 "
•The selected signal format will be displayed.
(The picture may be distorted while the signal format is being switched.)
Press the MENU button 3 times consecutively.
•The OSD information will go off.
) and DOWN ( ) arrow buttons to select OPTION.
) and DOWN ( ) arrow buttons to select VIDEO
) and DOWN ( ) arrow buttons to select the desired
) and DOWN ( ) arrow buttons to select the input
) and DOWN (
above, press the UP (
) arrow buttons to
C ".
b r
) and DOWN
41
)