How To Change The Signal For The Et-Md95Vm2 (Optional) - Panasonic PT-D7500U Operating Instructions Manual

How to change the signal for the ET-MD95VM2 (optional)

When ET-MD95VM2 (optional) is installed with the projector, select the signaling system according to the
connected device.
Procedure of setting
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
OPTION
SYSTEM INFORMATION
VIDEO SETTING
FAN CONTROL
P IN P
FUNC1
CONTRAST MODE
PASSWORD
:MENU SELECT
ENTER:SUB MENU
VIDEO SETTING
VIDEO SELECT
VIDEO SYSTEM
VIDEO
S VIDEO
AUX (LINE)
AUX (Y/C)
:MENU SELECT
:CHANGE
68
NORMAL
ON
P IN P
OFF
LINE or Y/C
AUTO 1
AUTO 1
AUTO 1
AUTO 1
Press the "MENU" button.
The MAIN MENU screen will be displayed.
Select "OPTION" with the
buttons.
Press the "ENTER" button.
The OPTION screen will be displayed.
Select "VIDEO SETTING" with the
buttons.
• When
Note
or under the items in the "PICTURE" or
"OPTION" screen, they indicate that there
are more adjustment (items).
Press the "ENTER" button.
The VIDEO SETTING screen will be displayed.
Choose an input signaling system with
the buttons and switch to "LINE
or Y/C" or "YCbCr" with the
buttons.
The selected signaling system appears.
(The picture may be distorted during the switching
operation.)
If "LINE or Y/C" is selected, choose a
video system with the
and switch to "AUTO1" or "AUTO2"
with the buttons.
The selected signaling system appears.
(The picture may be distorted during the switching
operation.)
Press the "MENU" button three times.
The on-screen indications disappear and the set
screen appears.
buttons are displayed above
buttons