Adjusting The Color Matching - Panasonic PT-D9610U Operating Instructions Manual

Adjusting the color matching

The projector is equipped with color matching adjustment functions to adjust color balance when using several
units in combination.
Adjustment procedure
MENU
AUTO SETUP
LENS
PICTURE
POSITION
OPTION
SIGNAL LIST
TEST PATTERN
MENU :
SUB MENU : ENTER
EXIT : MENU
PICTURE
TINT : nnn
SHARPNESS H : nnn
SHARPNESS V : nnn
NR : ＊ ＊ ＊
GAMMA MODE : n
FILTER : ＊ ＊ ＊ ＊ ＊ ＊
FRAME RATE : ＊ ＊ ＊ ＊
PAL CINEMA : ＊ ＊ ＊ ＊
COLOR MATCHING : ＊ ＊ ＊ ＊
MENU :
SELECT :
SUB MENU : ENTER
EXIT : MENU
COLOR MATCHING
RED
GREEN
BLUE
PATTERN :
SELECT :
SUB MENU : ENTER
EXIT : MENU
COLOR MATCHING : R
RED : nnn
GREEN : nnn
BLUE : nnn
PATTERN :
SELECT :
ADJUST : ＋−
EXIT : MENU
NOTE
For adjusting
• Effects of altering the color adjustment:
When altering the same color correction as the color adjustment: the luminance of the color under adjustment changes.
When altering the RED color correction: the RED component of the color under adjustment increases or decreases.
When altering the GREEN color correction: the GREEN component of the color under adjustment increases or
decreases.
When altering the BLUE color correction: the BLUE component of the color under adjustment increases or decreases.
• Adjustment requires skill and should be done only by service personnel or persons with sufficient knowledge of
projectors.
• All adjustments can be reset to factory default settings using the STD (standard) button.
• Adjustment is valid only during COLOR TEMP USER and DYNAMIC. It is invalid during LOW, MID and HIGH.
68
Press the MENU button. ... The MENU screen will be displayed.
Press the UP ( ) and DOWN (
Press the ENTER button. ... The PICTURE screen will be displayed.
Press the UP ( ) and DOWN (
Press the LEFT ( ) and RIGHT(
Press the ENTER button. ... The COLOR MATCHING screen will be displayed.
Press the UP ( ) and DOWN (
Press the ENTER button.
Press the UP ( ) and DOWN (
Adjust the value using the control level buttons (＋ and −) .
) arrow buttons to select PICTURE.
) arrow buttons to select COLOR MATCHING.
) arrow buttons to turn ON.
) arrow buttons to select the color to adjust.
) arrow buttons to select compensating color.