Remote Control Unit - Panasonic PT-D9610U Operating Instructions Manual

Name and function of each remote control part (continued)
〈 Remote control unit 〉
SYSTEM
POWER
SELECTOR
RGB INPUT 1 INPUT 2
BRIGHT
CONTRAST
1 2
PIC-
4 5
MUTE
ON
7 8
SCREEN
ID ALL
NEXT ID SELECT
Rear of remote control unit
LIGHT
12
STD
PROJECTOR
INPUT 3
MENU
LENS
ENTER
3
6
9
0
Transmitter
This emits the infrared signals which are
used to control the projector when the remote
control unit is being used as a wireless unit.
Wired remote control terminal
This terminal is used to connect the
accessory cable when the remote control
unit is being used as a wired unit.
MENU button
This button is used to make the MENU screen
and the respective adjustment screens appear
on the projection screen, and to return to a
previously-displayed screen.
Control level buttons
These buttons are used to adjust the
BRIGHT, CONTRAST, COLOR and TINT
and to adjust the lens.
ENTER button
This button is used to accept and activate
items selected in the on-screen menus.
Arrow buttons
These buttons are used to select and
adjust items in the on-screen menus.
If the button illumination is flashing
This indicates that the remote control unit
batteries are nearly flat. Replace them with new
batteries.
LIGHT button
The buttons on the front of the remote control unit will
be illuminated while this button is pressed.
The button illumination will switch off approximately
10 seconds after this button is released.
Battery compartment cover
Remove this cover and insert four AA-size batteries in
order to use the remote control unit.