Displaying The Projector Settings - Panasonic PT-D9610U Operating Instructions Manual

Displaying the projector settings

Display procedure
MENU
AUTO SETUP
LENS
PICTURE
POSITION
OPTION
SIGNAL LIST
TEST PATTERN
MENU :
SUB MENU : ENTER
EXIT : MENU
OPTION
SET RUNTIME : nnnnnh
LAMP POWER : ＊ ＊ ＊ ＊ ＊ ＊
CONTRAST MODE : ＊ ＊
RS-232C SETTING
SYSTEM INFORMATION
VIDEO MODULE SETTING
NETWORK MODULE SETTING
PASSWORD
MENU :
SUB MENU : ENTER
EXIT : MENU
SYSTEM INFORMATION
ROM Ver. n.nn
LAMP RUNTIME
NORMAL : nnnnnh
HIGH : nnnnnh
REMAIN : nnnnnh
SET RUNTIME : nnnnnh
INSIDE : ＊ ＊ ＊ ＊ ＊ ＊ ＊
EXHAUST : ＊ ＊ ＊ ＊ ＊ ＊ ＊
RGB : ＊ ＊ ＊ ＊ ＊ ＊ ＊
INPUT1 : ＊ ＊ ＊ ＊ ＊ ＊ ＊
INPUT2 : ＊ ＊ ＊ ＊ ＊ ＊ ＊
INPUT3 : ＊ ＊ ＊ ＊ ＊ ＊ ＊
EXIT : MENU
SYSTEM INFORMATION
ROM Ver. 2.00
LAMP RUNTIME
NORMAL:
HIGH:
REMAIN: 1380h
SET RUNTIME:
INSIDE : 25 ℃/76 ° F
EXHAUST : 61 ℃/143 ° F
RGB : NETWORK
INPUT1 : ＊＊-MD95SD1:SS
INPUT2 : ＊＊-MD95VM2:AW
INPUT3 : ＊＊-MD95RGB:AZ
EXIT : MENU
66
Press the MENU button. ... The MENU screen will be displayed.
Press the UP (
Press the ENTER button. ... The OPTION screen will be displayed.
Press the UP (
INFORMATION.
Press the ENTER button. ... The SYSTEM INFORMATION screen will be
displayed.
120h
0h
120h
:NW
) and DOWN ( ) arrow buttons to select OPTION.
) and DOWN ( ) arrow buttons to select SYSTEM
Firmware version number
Cumulative lamp usage time (normal mode)
Cumulative lamp usage time (HIGH mode)
Remaining lamp operating time
(calculated in normal mode)
Cumulative projector running time
Internal temperature information
Exhaust temperature information
Data for module in slot RGB (RGB)
Data for module in slot 1 (INPUT 1)
Data for module in slot 2 (INPUT 2)
Data for module in slot 3 (INPUT 3)