Setting The Projection Method - Panasonic PT-D9610U Operating Instructions Manual

Setting the projection method

The projection method can be set in accordance with the way the projector has been installed. If the projected
picture is upside-down or back-to-front, change the projection method while referring to illustrations A to D below.
A : Front-floor projection (FRONT-F)
C : Rear-floor projection (REAR-F)
Set the projection method by displaying on-screen displays using the control buttons on the remote control unit or
the projector operating panel.
Setting procedure
MENU
AUTO SETUP
LENS
PICTURE
POSITION
OPTION
SIGNAL LIST
TEST PATTERN
MENU :
SUB MENU : ENTER
EXIT : MENU
OPTION
ID : nn
SETTING : ＊＊＊＊＊＊＊
LAMP RUNTIME
NORMAL : nnnnnh
HIGH : nnnnnh
REMAIN : nnnnnh
SET RUNTIME : nnnnnh
LAMP POWER : ＊ ＊ ＊ ＊ ＊ ＊
CONTRAST MODE : ＊ ＊
MENU :
SELECT :
EXIT : MENU
Press the MENU button. ... The MENU screen will be displayed.
Press the UP( ) and DOWN (
• The text color of a selected item will change.
Press the ENTER button. ... The OPTION screen will be displayed.
Press the UP( ) and DOWN (
Press the LEFT ( ) and RIGHT (
• The display and the projection method will change as shown below each time the
LEFT ( ) or RIGHT (
F R O N T - F R E A R - C
Press the MENU button twice.
• The on-screen display will disappear and the screen will return to the normal
state.
B : Rear-ceiling projection (REAR-C)
D : Front-ceiling projection (FRONT-C)
)arrow buttons to select OPTION.
) arrow buttons to select SETTING.
) arrow buttons to select the projection method.
) arrow button is pressed.
R E A R - F F R O N T - C
25