Adjusting The Picture Quality - Panasonic PT-D9610U Operating Instructions Manual

Adjusting the picture quality

The following procedures can be used to adjust the picture quality to the desired setting.
Adjustment procedure
MENU
AUTO SETUP
LENS
PICTURE
POSITION
OPTION
SIGNAL LIST
TEST PATTERN
MENU :
SUB MENU : ENTER
EXIT : MENU
PICTURE
COLOR TEMP : ＊ ＊ ＊ ＊
BRIGHT : nnn
CONTRAST : nnn
COLOR : nnn
TINT : nnn
SHARPNESS H : nnn
SHARPNESS V : nnn
NR : ＊ ＊ ＊ ＊ ＊
GAMMA MODE : 2.2
MENU :
SELECT :
EXIT : MENU
indicator
indicator
PICTURE
TINT : nnn
SHARPNESS H : nnn
SHARPNESS V : nnn
NR : ＊ ＊ ＊
GAMMA MODE : n
FILTER : ＊ ＊ ＊
FRAME RATE : ＊ ＊ ＊
PAL CINEMA : ＊ ＊ ＊
COLOR MATCHING : ＊ ＊ ＊
MENU :
SELECT :
EXIT : MENU
Press the MENU button. ... The MENU screen will be displayed.
Press the UP ( ) and DOWN (
Press the ENTER button. ... The PICTURE screen will be displayed.
NOTE
• If a or indicator is shown at the bottom or top of the adjustment items
list in the PICTURE window, it indicates that the remaining part of the list can
be scrolled up or down in the window. Use the UP or DOWN arrow button
( ) to scroll the list.
Press the UP ( ) and DOWN (
adjustment items list until you reach the target item.
Press the LEFT ( ) and RIGHT (
setting.
• For available adjustment items and settings, see the table on the next page.
) arrow buttons to select PICTURE.
) arrow buttons to step through the
) arrow buttons to change the current
57