Panasonic PT-D9610U Operating Instructions Manual page 31

Connecting the input module signal source
Connecting the signal source to the input module for analog RGB signals
If using the input module for analog RGB signals in order to connect the projector to a personal computer, you will
also need to use a separate interface (D-SUB /BNC) cable.
1.Connecting an analog RGB signal source
RGB signal input module (sold separately)
RGB Module
ET-MD95RGB
H/H · V
R G B
D-SUB /BNC
Personal computer
2.Connecting a component signal source
RGB signal input module (sold separately)
RGB Module
ET-MD95RGB
P /C Y
r
R
High-definition VCR
ET-MD95RGB
G/Y B/P
R/P
B
R
V
(Purchase adapter cable locally)
ET-MD95RGB
R/P G/Y B/P
R B
P /C
P /C
b
B
R
H/H · V
V
CAUTION:
• Ternary synchronization signals cannot be input to the
H/H V and V terminals.
•
• Do not input synchronization signals to the H/H
terminals when SYNC ON GREEN signals are being input.
( "C" means "composite sync" in H/H
H/H · V
V
P /C
Y
r
b
B
DVD player
V)
•
Note:
• Connect either the VCR or DVD player
using three BNC cable.
Three BNC-to-RCA adaptors may be
required at the DVD player.
V and V
•
31