Re-Registering The Handset - Panasonic KX-TG5100M Operating Instructions Manual

Canceling Registration/Re-registration

Re-registering the Handset

If you want to re-register the handset to the base unit or a different base unit of the
same model, you need to register it to that base unit. The handset will be given a
new extension number of that base unit. Only one handset can be registered at a
time near the base unit.
Make sure the base unit and the other handsets are not being used.
Registration must be completed within 1 minute.
If you have canceled handset registration at a previous base unit (p. 66), start
from step 5.
1
Handset: Press [CONF/FUNCTION].
2
Handset: Scroll to "Initial setting" by
pressing [ ] or [ ], then press [ ] .
3
Handset: Scroll to "Registration" by
pressing [ ] or [ ], then press [ ] .
4
Handset: Press [ ] at "HS registration".
5
Base unit: Press [MUTE].
• The MUTE indicator flashes.
6
Handset:
(1) Press the soft key (
(2) Wait until a long beep sounds and the
display shows the number.
• Registration is complete.
• You can stop registration by pressing [OFF] on the handset and pressing [MUTE]
on the base unit.
If you have not canceled the handset registration at the previous base unit
(p. 66), the handset number still remains on that base unit memory. To erase the
handset number from the previous base unit, see the base unit Operating
Instructions. For KX-TG5100M or KX-TG5110M base unit: (1) Press
[FUNCTION/EDIT], (2) Press [MUTE], (3) Enter "335#", and (4) Enter that
handset number (1 to 8).
For assistance, please call: 1-800-211-PANA(7262)
Handset & Base Unit
).
OK
Initial setting
Registration
HS registration
Press MUTE on
base unit, then
OK on handset to
register handset
Ex. Extension number 2
Handset [2]
Registered
[2]
67