Re-Registering The Handset - Panasonic KX-TSC909CID Operating Instructions Manual

Canceling Registration/Re-registration

Re-registering the Handset

If you want to re-register the cordless handset to the base unit or a different base
unit of the same model, you need to register it to that base unit. The cordless
handset will be given a new extension number of that base unit. Only one cordless
handset can be registered at a time near the base unit.
Make sure the base unit and the other cordless handsets are not being used.
Registration must be completed within 1 minute.
If you have canceled handset registration at a previous base unit (p. 66), start
from step 5.
1
Cordless handset: Press [CONF/FUNCTION].
2
Cordless handset:
Scroll to "Initial setting" by pressing
[ ] or [ ], then press [ ] .
3
Cordless handset:
Scroll to "Registration" by pressing [ ]
or [ ], then press [ ] .
4
Cordless handset:
Press [ ] at "HS registration".
5
Base unit: Press [MUTE].
• The MUTE indicator flashes.
6
Cordless handset:
(1) Press the soft key (
(2) Wait until a long beep sounds and the
display shows the number.
• Registration is complete.
• You can stop registration by pressing [OFF] on the cordless handset and pressing
[MUTE] on the base unit.
If you have not canceled the cordless handset registration at the previous base
unit (p. 66), the handset number still remains on that base unit memory. To erase
the handset number from the previous base unit, see the base unit Operating
Instructions. For KX-TG2770S base unit: (1) Press [FUNCTION/EDIT], (2) Press
[MUTE], (3) Enter "335#", and (4) Enter that handset number (1 to 8).
For assistance, please call: 1-800-211-PANA(7262)
Base Unit & Handset
).
OK
Initial setting
Registration
HS registration
Press MUTE on
base unit, then
OK on handset to
register handset
Ex. Extension number 2
Handset [2]
Registered
[2]
67