Installing The Battery In The Handset; Battery Charge - Panasonic KX-TG5100M Operating Instructions Manual

Installation

Installing the Battery in the Handset

Insert the battery (
Close the cover.
To replace the battery:
Press the notch on the cover firmly and slide it as
indicated by the arrow. Replace the old battery with a new
one (p. 13). Close the cover and charge the handset for
about 6 hours.

Battery Charge

Place the handsets on the base
unit and the charger and charge
for about 6 hours before initial
use.
• The unit beeps once, the
CHARGE indicator lights and
"Charging" is displayed.
• When the battery is fully charged,
"Charge completed" is
displayed if there are no new calls
in the Caller List.
Battery strength
You can check the battery
strength on the handset
display.
The battery strength is as
shown in the chart on the
right.
12
), and press it down until it snaps into the compartment (
1
1
Display prompt
2
AND
CHARGE Indicator
Needs to be recharged.
(flashing)
(KX-TG5110M only)
Battery strength
Fully charged
Medium
Low
Discharged
).
2