Erasing Messages - Panasonic KX-TG5100M Operating Instructions Manual

Erasing Messages

The unit will announce the remaining recording time after playback, if it is less than
5 minutes. New messages cannot be recorded when:
— "Memory full" is heard.
— "
ALL MAILBOX FULL
— ANSWER ON indicator flashes rapidly (only when the Answering System is on).
Erase some, or all, of the messages in a mailbox. We recommend you erase
unnecessary messages after each playback.
Erasing a specific message
Base Unit
Press [ERASE] while the message you want to erase is being played.
• A short beep will sound and the unit will continue to play the next message.
Handset
Press [ ][4] while the message you want to erase is being played.
• A short beep will sound and the unit will continue to play the next message.
Erasing all messages in the mailbox
Base Unit
1
Press [ERASE] while the base unit is not
being used.
• "To erase all messages, please select Mailbox" is
heard.
2
Within 10 seconds, press the MAILBOX
button ([MAILBOX 1], [MAILBOX 2] or
[MAILBOX 3]).
• If Mailbox 2 or 3 has a password, enter it (p. 51).
• A long beep will sound and "Mailbox (No.)" and
"No messages" will be heard.
Handset
1. Press the soft key (
2. Press the soft key (
• If Mailbox 2 or 3 has a password, enter it (p. 51).
3. Press [ ][5] to erase all messages in the mailbox.
• A long beep will sound and "Mailbox (No.)" and "No messages" will be heard.
• To end remote operation, press [OFF].
56
" is displayed on the base unit.
.
)
PLAY
,
BOX1 BOX2
or ).
BOX3
Select MAILBOX
to erase all
messages
Ex. Mailbox 3 is selected.
Mailbox3
All erase
MAILBOX
3