Key Tone; Incoming Call Tone - Panasonic KX-TG5100M Operating Instructions Manual

Key Tone

Handset
You can select whether or not the handset keys will sound tones (key tone,
confirmation tone, error tone). The factory preset is ON.
1
Press [CONF/FUNCTION].
2
Scroll to "Initial setting" by pressing
[ ] or [ ], then press [ ].
3
Scroll to "Key tone" by pressing [ ] or [ ],
then press [ ].
4
Select "Off" or "On" by pressing [ ] or [ ].
5
Press the soft key (

Incoming Call Tone

During an intercom call, while using the Room Monitor feature, or while listening to
messages, you can be informed by two tones if a call arrives.
If you set incoming call tone to ON, this incoming call tone will be heard for as long
as the line rings. To bypass the incoming call tone, set it to OFF. To set the incoming
call tone to sound twice, set to "2". The factory preset is "2".
You can set the incoming call tone on the handset or the base unit separately.
1
Handset: Press [CONF/FUNCTION].
Base unit: Press [FUNCTION/EDIT].
2
Scroll to "Ringer setting" by pressing
[ ] or [ ], then press [ ].
3
Scroll to "Incoming call" by pressing [ ]
or [ ], then press [ ].
4
Select "On", "Off" or "2" by pressing [ ] or
[ ].
5
Handset: Press the soft key (
Base unit: Press [ ] (Save), then press [STOP].
For assistance, please call: 1-800-211-PANA(7262)
), then press [OFF].
SA VE
Handset Base Unit
), then press [OFF].
SA VE
Special Features
Initial setting
Key tone
Key tone
Ringer setting
Incoming call
Incoming call
tone :2
:On
49