Intercom; Making Intercom Calls - Panasonic KX-TG5100M Operating Instructions Manual

Intercom

A 2-way intercom can be set up between a handset and the base unit, and between
two handsets (when the system has two or more handsets, p. 3). You can call all
handsets from the base unit at once.
Page the desired unit(s) by entering the extension number, shown in the top right of
each handset's display. The base unit's extension number is 0.
• Using this feature, you can also locate a misplaced handset.

Making Intercom Calls

Handset
1
Press [HOLD] (INTERCOM).
2
To page the base unit, press [0].
To page another handset, press the
extension number ([1] to [8]).
• The paged unit will ring for 1 minute.
• To stop paging, press [OFF].
3
When the paged party answers, start talking.
• You can switch to the speaker by pressing [
To switch back to the receiver, press [
4
To disconnect the intercom, press [OFF].
Base Unit
1
Press [LOCATOR/INTERCOM/TRANSFER].
• The LOCATOR/INTERCOM/TRANSFER indicator
and the DIGITAL SP-PHONE indicator light.
2
To page all handsets, press [0].
To page a handset, press its extension
number ([1] to [8]).
• The handset(s) will ring for 1 minute.
• To stop paging, press [DIGITAL SP-PHONE] or
[LOCATOR/INTERCOM/TRANSFER].
3
When the paged party answers, talk into the
MIC.
4
To disconnect the intercom, press [DIGITAL SP-PHONE] or
[LOCATOR/INTERCOM/TRANSFER].
40
Press extension#
to call
Ex. Calling Base unit
Calling [0]
Ex. Calling Handset 2
Calling [2]
Intercom
00-00-05
].
].
Press extension#
to call
MUTE=Monitor
Ex. Calling all Handsets
Paging [ALL]
Ex. Calling Handset 1
Calling [1]
Intercom
00-00-05
01
01