Table of Contents
Advertisement
16
=» Settings
SS
SE
ee
ES
Tl
NE
d
Selecting the Dialing Mode
You can program the dialing mode using the handset near the base unit.
if you have touch tone service, set to "Tone". If rotary or pulse service is
used, set to "Pulse". Your phone comes from the factory set to "Tone".
The TALK indicator light must be off before programming.
1
Press
[PROGRAM].
Save
AUTO#
?
o The TALK indicator flashes.
v=Next
A=Yes
a Press SEARCH (V) (Next key) repeatedly
der dial mode 2
until "Set dial mode
?" is displayed.
v=Next
A=Yes
V=Tone
aAz=Pulse
4 To select "Pulse", press SEARCH (N.
Dial mode
OR
To select "Tone", press SEARCH V).
e A beep sounds.
Dial
mode
o The display will return to step 2.
To return to the stand-by mode,
Tone
press
or wait for 60 seconds.
ə To cancel during programming, press
or (PROGRAM). Start again from
step 1.
o If 3 beeps sound and the display shows "Save
error", move closer to the
base unit and try again. If "Save error" is still displayed, place the handset on
the base unit. Start again from step 1.
o If either line has rotary or pulse service, set to "Pulse". When making a call
using a tine which has touch tone service, press [*J first and then dial the
number.
| If a power failure occurs, the mode will return to the factory preset
(Tone). Reprogram if necessary.
Advertisement
Table of Contents
