Table of Contents
Advertisement
Special Features
Using the PAUSE Button
Distance Calls)
We recommend you press [REDIAL/PAUSE] on the base unit or [PAUSE/REDIAL]
on the cordless handset if a pause is required for dialing with a PBX or to make a
long distance call.
Ex. Line access number [9] (PBX)
[9]
[REDIAL/PAUSE] or [PAUSE/REDIAL]
• Pressing [REDIAL/PAUSE] or [PAUSE/REDIAL] once creates a 3.5 second
pause. This prevents misdialing when you dial after confirming the entered
number (p. 29, 31) or dial a stored number (p. 42).
• Pressing [REDIAL/PAUSE] or [PAUSE/REDIAL] more than once increases the
length of the pause between numbers.
Incoming Call Tone
During an intercom call, you can be informed of incoming calls by 2 tones.
If you set incoming call tone to ON, this incoming call tone will be heard for as long
as the line is ringing. To bypass the incoming call tone, set it to OFF. To set the
incoming call tone to sound 2 times, set to "2". The factory preset is "2".
You can set the incoming call tone on the base unit or the cordless handset
separately.
1
Base unit: Press [FUNCTION/EDIT].
Cordless handset: Press [CONF/FUNCTION]
2
Press [ ] at "Telephone".
3
Scroll to "Ringer setting" by pressing [ ]
or [ ], then press [ ].
4
Scroll to "Incoming call" by pressing [ ]
or [ ], then press [ ].
5
Select "On", "Off" or "2" by pressing [ ] or
[ ].
6
Base unit: Press [ ] (Save), then press [STOP].
Cordless handset: Press the soft key (
52
Base Unit Handset
Base Unit Handset
(For PBX Line/Long
Phone number
.
Incoming call
), then press [OFF].
SAVE
Telephone
Ringer setting
Incoming call
tone :2
Advertisement
Table of Contents
